+1-718 3079013 (USA) & +88-01707091372 (Bangladesh)
info@bausahope.com
+1-718 3079013 (USA) & +88-01707091372 (Bangladesh)
info@bausahope.com
Our world is protecting your world.
Mission & Vision
Our Vision is to be the leader in designing, supplying and providing technological products, services and solutions that expand the Fire Safety and Electrical Security.
We provide innovative, comprehensive and flexible solutions for the connected world by listening to our customers, partners, and employees, utilizing our design and technical excellence, and creating a culture where employees develop and grow.
Services
Service Department has a team of fully trained and experienced service engineers. Located throughout the Bangladesh, they provide system commissioning along with routine maintenance inspection and repair services.
Fire Safety Research
With the most effective laboratories in the Bangladesh, a highly qualified team of expert engineers and technicians, we are able to deliver practical solutions, technical advice and a bespoke service to a wide range of clients. With lot of experience in testing, research, consultancy and fire investigation, we work with many stakeholders to solve a diverse range of problems.
The A1000 analogue Optical Smoke Detector is a point detection device that continuously monitors the air in the protected area to provide the earliest warning of a fire condition. The advanced design of the smoke inlet and optical chamber guarantees a very high resistance to the entry of dust, ensuring a higher level of false alarm rejection without compromising sensing performance. This detector forms part of the Altair range of aesthetically pleasing low profile detection and alarm products and is fully compatible* with all fire control equipment utilising the Argus fully digital communication protocol.
The A1000L Intelligent Optical Smoke Detector is a point detection device that continuously monitors the air in the protected area to provide the earliest warning of a fire condition. The advanced design of the smoke inlet and optical chamber guarantees a very high resistance to the entry of dust, ensuring a higher level of false alarm rejection without compromising sensing performance. This detector forms part of the Altair range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Argus fully digital communication protocol.k
The A2000 Intelligent Multi-Criteria Detector is a point detection device that continuously samples both the air and the temperature variation in the protected area to provide the earliest warning of a fire condition. Special algorithms utilise information from both the smoke and heat sensing elements to ensure high level of false alarm rejection without compromising genuine alarm sensing performance. This detector forms part of the Altair range of aesthetically pleasing low profile detection and alarm products and is fully compatible* with all fire control equipment utilising the Argus fully digital communication protocol.
The A2000L Intelligent Multi-Criteria Detector is a point detection device that continuously samples both the air and the temperature variation in the protected area to provide the earliest warning of a fire condition. Special algorithms utilise information from both the smoke and heat sensing elements to ensure high level of false alarm rejection without compromising genuine alarm sensing performance. This detector forms part of the Altair range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Argus fully digital communication protocol.
The A3500 Intelligent Heat Detector is a point detection device that continuously samples for temperature variation in the protected area to provide the earliest warning of a fire condition in areas where traditional smoke detection products are not suitable. This detector forms part of the Altair range of aesthetically pleasing low profile detection and alarm products and is fully compatible* with all fire control equipment utilising the Argus fully digital communication protocol. An integral magnet test facility allows easy activation to verify correct functionality and reporting.
The A3500L Intelligent Heat Detector is a point detection device that continuously samples for temperature variation in the protected area to provide the earliest warning of a fire condition in areas where traditional smoke detection products are not suitable. This detector forms part of the Altair range of aesthetically pleasing low profile detection and alarm products and is fully compatible with all fire control equipment utilising the Argus fully digital communication protocol.
The ALBLS100-32/AV is a fully intelligent and aesthetically pleasing low profile Base Sounder with combined 360° visual indicator. By utilising the Argus fully digital communication protocol, reliable and fast operation is achieved even when employing the impressive 240 device loop capacity. Once installed on to a compatible loop the device is fully addressable and benefits from an extensive range of intelligent functionality, including sounder synchronisation. The unit’s integral detector base has easy access for loop cabling and allows for the connection of both the sounder and associated detector via a single set of cable terminations.
The LAB1000 standard intelligent low profile mounting base has been designed for use with any of the Altair point type intelligent detector range. The base’s layout allows plenty of space for cable access and has multiple mounting-hole positions for use with a variety of back boxes. The unit has terminations for loop wiring, remote indicator connection and termination of shield cabling. When no device is fitted into the base, an automatic spring connection maintains loop continuity ready for loop cable testing. Once the device is refitted the spring is displaced allowing the loop isolators to operate.
The SG100 Wireless Optical Smoke Detector is a fully intelligent device which is compatible with all of the Argus Wireless Translator and Expander Modules. The Argus range of wireless detectors are third party approved to EN54 and utilise the latest cutting edge technologies and features. The device is capable of being configured on site and its patented chamber assists with the control of unwanted alarms. The well proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability.
The SG200 Wireless Multi Criteria detector is a fully intelligent device, compatible with all Argus Translator and Expander Modules. The sensor combines both smoke detection and thermal detection technologies which can be used separately or as a combined heat and smoke sensor for improved performance and reduced unwanted alarms. The patented chamber and double dust trap provides the chamber with additional protection from airborne contamination whilst the well proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability.
The SG350 Wireless Thermal Detector is a fully intelligent device which is compatible with all of the Argus Wireless Translator and Expander Modules. The Argus range of wireless detectors are third party approved to EN54 and utilise the latest cutting edge technologies and features. The device is capable of being configured on site as either a fixed temperature, rate of rise or high temperature device type. The well proven adaptive radio signal processing algorithms ensure the highest levels of life safety and system reliability.
The SGCP100 Manual Call Point (MCP) is a fully intelligent device which is compatible with all Argus Translator and Expander Modules. The unit has a resettable plastic element, which displays a drop down warning flag when operated. A key is supplied with the MCP for reset and case opening. The unit can be fitted with an optional transparent cover for protection against accidental operation or with a weatherproof enclosure for use oudoors or in hostile environments.
The SGFI200-D Wireless Remote Indicator is a low profile unit with a large red LED panel, which can be used to indicate a variety of events or alarms on the fire system. When used with the Argus VW2W128 translator module the unit is fully programmable through the control equipment cause and effect. The device is ideal for indicating the activation of a detector which is located where visual alarm confirmation is difficult, such as a lift shaft, ceiling void or locked room. Indication of the operation of other part of the fire system is also possible. Powered by standard lithium batteries and utilising well proven adaptive radio signal processing algorithms ensures the highest levels of life safety and reliability.
The VCP100 Intelligent Manual Call Point is compatible with all fire control panels utilising the Argus fully digital communication protocol. Reliable and fast operation is achieved even when employing the impressive 240 device loop capacity. The operating “glass” element on the front face of the Call Point and the alarm flag indicator can be easily reset using a special key. Therefore, after activation, the call point can be quickly restored to its normal quiescent state making it ready for immediate re-use. The Call Point design also provides bi-directional short circuit isolators, plus a visual LED indicator to confirm communication polling and alarm activation.
The Elite analog addressable Fire Control Panel supports 2 or 4 SLC loops for a total of 500 primary points or 800 points using subpoints. SLC loop communications uses standard twisted pair cabling, shielded cable is not necessary. The panel may be configured with various communication cards; Communications options support central station monitoring, Virtual Panel, and networking. The Panel can be configured as a stand alone panel with just a few devices for a small building, it can also operate as the building system and can be part of a network with a total of 64 nodes serving a multiple building campus or a very large facility. Auto Learn capability provides a convenient method to troubleshoot new installations before final programming is loaded.
Syncro AS is a versatile range of open protocol fire alarm control panels compatible with existing Syncro fire alarm panel technology. Available with one or two detection loops capable of hosting up to 126 devices (Apollo), 240 devices (Argus Vega) or 127 devices (Hochiki). Syncro AS uses leading edge microprocessor based electronics to provide a flexible control system with high reliability and integrity. Suitable for all small to medium sized fire detection systems, Syncro AS control panels can be expanded and networked to become part of much larger systems if the need arises, therefore providing a future proof solution for any installation. With its large graphical display and ergonomic button and indicator layout, the Syncro AS control panel is simple and straightforward to understand for installers, commissioning engineers and end users alike.
The Sigma A-CP range of conventional fire control panels with optional built in communicator are available with 2, 4 or 8 initiating circuits which may be extensively configured via a simple front panel operated programming method. The low standby power requirements and cost effective small batteries allow the panel to be mounted in a small discrete enclosure which is available in standard red or optionally in an attractive grey colour. A simple programming method using just 3 front panel buttons allows an extensive list of configuration options to be set and reviewed. Single board construction which allows easy removal of all electronic parts by removing just 2 screws and ample provision of cable entry knockouts simplify installation. 4 Amp notification appliance power and built in selectable sync protocols provide ample power and control for a wide range of standard notification appliances. The built in RS485 communications bus provides the facility to connect 4 wire annunciators or ancillary relay boards to provide further indication and control options throughout a premises. The optional DACT allows dual line reporting to central stations and provides a 500 event history buffer.
Designed and manufactured to the highest standards in a quality controlled environment and with UL and FM approvals, the Sigma A-XT releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations. With three initiation circuits as standard, release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications. The extensive configuration options of the Sigma A-XT allow the functionality of the system to be extensively modified. The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until release for added user safety. The countdown timer is duplicated on up to seven remote status units to provide local indication of the system status. With all of the electronics mounted on a single, easily removable, steel plate Sigma A-XT panels are both robust and easy to install. Sigma A-XT is supplied in an enclosure that matches the design and colour of the Elite RS range and is available in standard red or optional grey.
The Sigma CP range consists of a series of conventional fire alarm control panels designed in accordance with European standards BS EN54-2 and BS EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment. The range consists of 2, 4 and 8 zone control panels. All control panels are available in two versions: 1. Sigma K11 range in which detectors and call points are wired on separate circuits to sounders (two sounder circuits are provided).The Sigma KL1 range is offered supplied with Line Continuity Monitoring Units (LCMU’s) included to meet the requirements that if a detector is removed any MCP’s fitted to the system will still operate. 2. Sigma T11 range in which compatible detector bases, call points and polarised sounders are wired to the same pair of cables. Commonly referred to as a two-wire system. Wiring sounders to the detection circuits eliminates the need to install sounder circuit cables and also offers the ability to provide zoned or two stage sounder operation. (T series only) All control panels have an integral, mains powered battery charger and power supply designed in accordance with the requirements of BS EN54-4. Also available is a range of Ancillary Cards compatible with all Sigma CP Models. Up to 7 Cards of each model can be fitted to each Sigma CP Control Panel & Sigma CPR Repeater Panel Ranges. These include: Sigma Ancillary Board (K580) operating software version V2.0 or above. See DS39 for more details. Sigma Sounder Board (K461) operating software version V3.0 or above. See DS48 for more details.
Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals, the Sigma XT extinguishant releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations. With three detection zones as standard, extinguishant release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications. The extensive configuration options of the Sigma XT allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment (EN12094-1, EN54-2 and EN54-4). The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety. The countdown timer is duplicated on up to seven remote status units to provide local indication of the extinguishant system status. With all of the electronics mounted on a single, easily removable, steel plate Sigma XT panels are both robust and easy to install. Sigma XT is supplied in an enclosure that matches the design and colour of the Sigma CP range.
Model F1 LO series sprinklers are K8.0 (115) standardresponse sprinklers with a glass bulb operating element. The sprinklers use a compact frame for a low-profile, decorative appearance. Model F1 LO series sprinklers are available in a variety of finishes as indicated in the Finishes table in this Bulletin. Standard spray Model F1 LO sprinklers are available in pendent, recessed pendent, and upright configurations. Extended coverage pendent and recessed pendent Model F1 LO sprinklers are available for modifications or additions to existing light hazard sprinkler systems with standard-response sprinklers as well as for replacement of individual standard-response sprinklers in existing light hazard sprinkler systems. A conventional (old-style) Model F1 LO sprinkler is also available. Refer to the Installation Data in this Bulletin for additional information on each specific Model F1 LO sprinkler. Model F1 LO sprinklers are available in a range of temperature ratings as indicated in the Temperature Ratings table in this Bulletin, which may be modified by the Installation Data for each specific model.
The F156, F142, F1XLH & F128 Series Glass Bulb Sprinkler combines the durability of a standard sprinkler with the attractive low profile of a decorative sprinkler. Whether installed on exposed piping or in an office ceiling, it is functional and attractive. Beautifully versatile is the description for the Reliable Models F156, F142, F1XLH & F128 Series Recessed glass bulb sprinkler. Recessing the F156, F142, F1XLH & F128 Series enhances its already low profile decorative appearance, and facilitates a rapid and perfect installation. The recessed escutcheon of the Models F156, F142, F1XLH & F128 are highly adjustable. The two piece construction makes field installation a very easy and rapid task. This also allows ceiling panels to later be removed without shutting down the fire protection system, thus facilitating maintenance of above ceiling services.
Reliable Models F1-300 Upright, Pendent and Recessed Pendent Sprinklers are high pressure rated automatic sprinklers which can handle a maximum service pressure of 300 psi (20,7 bar). The Model F1-300 glass bulb sprinkler combines durability with the attractive low profile of a decorative sprinkler. Whether installed on exposed piping or below an office ceiling, it is functional and attractive. The Model F1 Recessed Escutcheon provides convenient adjustment for Model F1-300 Sprinklers. The two-piece construction makes field installation an easy and rapid task. This also allows ceiling panels to later be removed without shutting down the fire protection system, thus facilitating maintenance of above ceiling services. The Models F1-300 Upright, Pendent and Recessed Pendent automatic sprinklers are standard response sprinklers which utilize a 5.0mm frangible glass bulb. The glass bulb contains an accurately controlled amount of special fluid hermetically sealed inside. The other sprinkler parts are made of brass, copper or beryllium nickel. At normal temperatures, the glass bulb contains fluid in both the liquid and vapor phases. The vapor phase can be seen as a small bubble. As heat is applied, the liquid expands, forcing the bubble smaller and smaller as the liquid pressure increases. Continued heating forces the liquid to push out against the bulb, causing the glass to shatter, opening the waterway and allowing the deflector to distribute the discharging water.
Reliable Models F156-300 Upright, Pendent and Recessed Pendent Sprinklers are high pressure rated automatic sprinklers which can handle a maximum service pressure of 300 psi (20,7 bar). The Model F156-300 glass bulb sprinkler combines durability with the attractive low profile of a decorative sprinkler. Whether installed on exposed piping or below an office ceiling, it is functional and attractive. The Model F1 Series Recessed Escutcheon provides convenient adjustment for Model F156-300 Sprinklers. The two-piece construction makes field installation an easy and rapid task. This also allows ceiling panels to later be removed without shutting down the fire protection system, thus facilitating maintenance of above ceiling services. The Models F156-300 Upright, Pendent and Recessed Pendent automatic sprinklers are standard response sprinklers which utilize a 5.0mm frangible glass bulb. The glass bulb contains an accurately controlled amount of special fluid hermetically sealed inside. The other sprinkler parts are made of brass, copper or beryllium nickel. At normal temperatures, the glass bulb contains fluid in both the liquid and vapor phases. The vapor phase can be seen as a small bubble. As heat is applied, the liquid expands, forcing the bubble smaller and smaller as the liquid pressure increases. Continued heating forces the liquid to push out against the bulb, causing the glass to shatter, opening the waterway and allowing the deflector to distribute the discharging water.
The Reliable Model G Automatic Sprinkler utilizes the center strut solder in compression principle of construction. The fusible alloy is captured in the cylinder of the solder capsule by a stainless steel ball. When the fusible alloy melts, the ball moves into the cylinder allowing the cylinder to fall away from the sprinkler. When this happens, the lever is released to spring free from the sprinkler so that all of the operating parts clear from the waterway allowing the deflector to distribute the discharging water. Except for the parts in the cylinder as mentioned above, the sprinkler components are made from copper based alloys for maximum corrosion protection. Lead plated, wax coated or wax over lead plated sprinklers are available for specially severe environments. Chrome plated sprinklers are available for decorative purposes. All sprinklers are individually hydrostatically tested. All sprinklers are identified as to their fusing point by markings that appear on several of the operating parts and by an identifying color that appears on the frame.
All Reliable Model G Automatic Sidewall Sprinklers utilize the center strut in compression principle of construction. The fusible alloy, retained in the cylinder of a small solder capsule by a stainless steel ball, acts as the trigger of the sprinkler. When the fusible alloy melts, the sprinklers operating parts spring free from the sprinkler, clearing the water way and allowing the sprinkler to distribute the discharging water.
The Reliable Model G4 Concealer™ standard response uses the proven Model G fusible element in a standard style sprinkler frame with a drop-down deflector. This assembly is recessed into the ceiling and concealed by a flat cover plate. This threaded engagement provides ˝” (13mm) of cover adjustment. The flat cover plate is attached to the skirt using an ordinary temperature classification solder. This results in a strong cover plate assembly with an ordinary temperature rating, and an intermediate temperature sprinkler which can be installed in 150°F (66°C) environments. When the ceiling temperature rises, the solder holding the cover plate to the skirt melts, the flat cover plate released thus exposing the sprinkler inside to the rising ambient temperature. The subsequent fusing of the sprinkler element opens the waterway and causes the deflector to drop into position to distribute the discharging water. Any secure engagement of the threads between the cover plate and cup will assure that the drop–down deflector is properly located below the ceiling when a sprinkler operates.
The Reliable Model G4-300 Concealer™ uses the proven Model G fusible element in a standard style sprinkler frame with a drop down deflector. This assembly is recessed into the ceiling and concealed by a flat cover plate. The cover plate and sprinkler cup assemblies are attached using a strong threaded engagement. This threaded engagement provides ˝” (13mm) of cover adjustment. The cover plate is attached to the skirt using an ordinary temperature classification solder. This result in strong cover plate assembly with an ordinary temperature rating, and an intermediate temperature sprinkler which can be installed in 150°F (66°C) environments. When the temperature at the ceiling rises, the solder holding the cover plate fuses, allowing the release of this part and thus exposing the sprinkler inside to the rising ambient temperature.
Today’s modern buildings demand that a sprinkler not only provide the best fire protection but also achieve an attractive appearance. Reliable’s Model G Recessed Sprinkler meets both criteria. It combines the fire fighting capability of a proven sprinkler with the smallest practicable recessing unit. Its small profile does not disrupt the overhead aesthetics, and yet one vertical glance upward gives a visual assurance of the finest in fire protection, an automatic sprinkler system. The Model G Recessed Sprinkler’s threaded two-piece construction makes initial field installation a very easy task. It allows ceilings panels to be removed without shutting down the fire protection thus facilitating maintenance of above ceiling services. The adjustable one inch NPT inlet versions have one and one half inches of adjustment which eliminates both the normally required reducing coupling and the need to accurately cut drop nipples. This sprinkler can be adjusted after the ceiling is in place and even while the system is pressurized eliminating the final corrections to pipe hangers or ceilings that might otherwise be required. The Reliable Model G Automatic Sprinkler is the heart of the Recessed Sprinkler. This sprinkler utilizes the center strut solder in compression principle of construction. The fusible alloy, captured in the cylinder of a small solder capsule by a stainless steel ball, acts as the trigger of the sprinkler. When the fusible alloy melts, the sprinkler operating parts spring free from the sprinkler clearing the waterway and allowing the deflector to distribute the discharging water.
Attractively versatile is the description for the Reliable Model G/F1 Recessed Automatic Sprinkler. The Model G/F1 Recessed Sprinkler facilitates a rapid and perfect installation. When this sprinkler is used in place of any standard pendent sprinkler a more attractive and easier installation is the result. The Model G/F1 Recessed escutcheon is highly adjustable. The two piece construction makes field installation a very easy and rapid task. The escutcheon collar threads onto the sprinkler inlet end and the sprinkler and collar are easily installed into the drop nipple using the Model RC1 Sprinkler Wrench. The escutcheon sleeve is then simply pushed onto the collar after the ceiling panels are installed. This also allows the ceiling panels to later be removed without shutting down the sprinkler system protection, thus facilitating maintenance of above ceiling services.
Energy Efficiency
Energy Star rated appliances are highly recommended – a new refrigerator, for example, uses 40% less energy than a model produced before 1993 Energy Efficient Lighting
White-light LED lighting products, with proper design and use, can last at least 25 000 hours (or 22 years based on average household use). This is over 2.5 times longer than compact fluorescent light bulbs, offer better performance in cold temperatures, are unaffected by turning them on and off frequently, do not require any warm-up time (instant on) and do not contain mercury or lead
Devices such as the WaterCycle can be incorporated, which transfers energy from warm waste water to incoming cold water, which in turn supplies the hot water heater. This device consumes no energy, reduces carbon emissions, has no moving parts and is maintenance free.
A great and inexpensive way to lower home heating bill is to install a programmable setback thermostat to automatically raise and lower the temperature based on your routine
Save up to 3%-4% on your heating costs by turning your thermostat down 3°C for at least eight hours every day
567 PINE STREET, 1ST FLOOR,
BROOKLYN, NY 11208,
USA
+1-718 3079013 (USA) & +88-01707091372 (Bangladesh)
INFO@BAUSAHOPE.COM
